W6E630-NT03-01

Fabricante: EBM-PAPST

Descrição:
AC axial fan - AxiBlade
Weight: 23.7 kg
Motor size: 110
Size: 630 mm
Rotor surface: Painted black
Terminal box material: PP plastic
Impeller material: PP plastic
Fan housing material: Sheet steel, galvanized and coated with black plastic (RAL 9005)
Guard grille material: Steel, coated with black plastic (RAL 9005)
Number of blades: 5
Airflow direction: V
Direction of rotation: Clockwise, viewed toward rotor
Degree of protection: IP54
Insulation class: "F"
Ambient temperature note: Occasional start-up at temperatures between -40°C and -25°C is permitted. For continuous operation at ambient temperatures below -25°C (such as refrigeration applications), use must be made of a fan design with special low-temperature bearings.
Moisture (F) / Environmental (H) protection class: H2
Max. permitted ambient temp. for motor (transport/storage): +80 °C
Min. permitted ambient temp. for motor (transport/storage): -40 °C
Installation position: Shaft horizontal or rotor on bottom; rotor on top on request
Condensation drainage holes: On rotor side
Mode: S1
Motor bearing: Ball bearing
Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system): <= 3,5 mA
Electrical hookup: Terminal box
Motor protection: Thermal switch auto reset, lead out, with basic insulation
Protection class: I (with customer connection of protective earth)
Motor capacitor according to EN 60252-1 in safety protection class: S0
Conformity with standards: EN 61800-5-1 / CE
Approval: VDE / EAC