W3G910-LU25-D1

Fabricante: EBM-PAPST

Descrição:
EC axial fan - AxiBlade
Weight: 53 kg
Motor size: 150
Size: 910 mm
Rotor surface: Painted black
Electronics housing material: Die-cast aluminum, painted gray
Impeller material: PP plastic
Fan housing material: Sheet steel, galvanized and coated with black plastic (RAL 9005)
Material guide vanes: PP plastic
Guard grille material: Steel, coated with black plastic (RAL 9005)
Internal diffuser material including cover: PP plastic
Number of blades: 5
Blade pitch: 0°
Airflow direction: V
Direction of rotation: Clockwise, viewed toward rotor
Degree of protection: IP55
Insulation class: "F"
Ambient temperature note: Occasional start-up at temperatures between -40°C and -25°C is permitted. For continuous operation at ambient temperatures below -25°C (such as refrigeration applications), use must be made of a fan design with special low-temperature bearings.
Moisture (F) / Environmental (H) protection class: H2
Max. permitted ambient temp. for motor (transport/storage): +80 °C
Min. permitted ambient temp. for motor (transport/storage): -40 °C
Installation position: Shaft horizontal or rotor on bottom; rotor on top on request
Condensation drainage holes: On rotor side
Mode: S1
Motor bearing: Ball bearing
Technical features: - Operation and alarm display with LED - External 15-50 VDC input (parameterization) - Alarm relay - Integrated PI controller - Configurable inputs/outputs (I/O) - MODBUS V6.3 - Motor current limitation - RS-485 MODBUS-RTU - Soft start - Voltage output 3.3-24 VDC, Pmax = 800 mW - Control interface with SELV potential safely disconnected from the mains - Thermal overload protection for electronics/motor - Line undervoltage / phase failure detection
EMC immunity to interference: According to EN 61000-6-2 (industrial environment)
EMC interference emission: According to EN 61000-6-3 (household environment), except EN 61000-3-2 for professionally used equipment with a total rated power greater than 1 kW
Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system): <= 3,5 mA
Electrical hookup: Terminal box
Motor protection: Reverse polarity and locked-rotor protection
Protection class: I (with customer connection of protective earth)
Conformity with standards: EN 61800-5-1 / CE
Approval: CSA C22.2 No. 77 + CAN/CSA-E60730-1 / EAC / UL 1004-7 + 60730-1