D3G160-IB09-02

Fabricante: EBM-PAPST

Descrição:
EC centrifugal fan
Weight: 8.86 kg
Motor size: 84
Size: 160 mm
Rotor surface: Painted black
Impeller material: Sheet steel, galvanized
Housing material: Sheet steel, galvanized
Motor suspension: Motor mounted on brackets for one-sided vibration damping
Direction of rotation: Counterclockwise, viewed toward rotor
Degree of protection: IP54
Insulation class: "F"
Moisture (F) / Environmental (H) protection class: H1
Max. permitted ambient temp. for motor (transport/storage): +85 °C
Min. permitted ambient temp. for motor (transport/storage): -40 °C
Installation position: Shaft horizontal or rotor on bottom; rotor on top on request
Condensation drainage holes: On rotor side
Mode: S1
Motor bearing: Ball bearing
Technical features: - Output 10 VDC, max. 10 mA - Operation and alarm display - Tach output - Alarm relay - Integrated PID controller - Power limiter - Motor current limitation - PFC, active - RS-485 MODBUS-RTU - Soft start - Control input 0-10 VDC / PWM - Control interface with SELV potential safely disconnected from the mains - Thermal overload protection for electronics/motor - Line undervoltage / phase failure detection
Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system): <= 3,5 mA
Electrical hookup: Terminal strip
Motor protection: Thermal switch auto reset, internally connected
with cable: Variable
Pollution degree: 2
Protection class assignment: I; If a protective earth is connected by the customer|This component for installation may have several local protection classes. This information relates to this component’s basic design.|The final protection class is based on the component’s intended installation and connection.
Conformity with standards: EN 61800-5-1; EN 60335-1 / UKCA / CE
Approval: EAC