D3G318-AA37-11
Manufacturer: EBM-PAPST
(3 reviews)
Description:
EC centrifugal fan
Weight: 21.2 kg
Motor size: 112
Size: 318 mm
Rotor surface: Painted black
Electronics housing material: Die-cast aluminum
Impeller material: Sheet steel, galvanized
Housing material: Sheet steel, galvanized
Motor suspension: Motor mounted on brackets for one-sided vibration damping
Direction of rotation: Clockwise, viewed toward rotor
Degree of protection: IP54
Insulation class: "B"
Moisture (F) / Environmental (H) protection class: H1
Max. permitted ambient temp. for motor (transport/storage): +80 °C
Min. permitted ambient temp. for motor (transport/storage): -40 °C
Installation position: Shaft horizontal
Condensation drainage holes: None
Mode: S1
Motor bearing: Ball bearing
Technical features: - Output 10 VDC, max. 10 mA - Alarm relay - Motor current limitation - PFC, active - Soft start - Control input 0-10 VDC - Control interface with SELV potential safely disconnected from supply - Thermal overload protection for electronics/motor - Line undervoltage / phase failure detection
EMC immunity to interference: According to EN 61000-6-2 (industrial environment)
EMC circuit feedback: According to EN 61000-3-2/3
EMC interference emission: According to EN 61000-6-4 (industrial environment)
Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system): <= 3,5 mA
Motor protection: Thermal switch auto reset, internally connected
with cable: Variable
Protection class: I (with customer connection of protective earth)
Conformity with standards: EN 61800-5-1 / CE
Approval: EAC
At PARTS HUB LLC, we supply not only EBM-PAPST products but also products from many other brands. We offer a wide range of products to provide the best solutions for our customers' needs. For more detailed information about the EBM-PAPST - D3G318-AA37-11 product, please make a request immediately. If you would like to request a different product, request offer or send an email to info@usapartshub.com.
Request for quote EBM-PAPST D3G318-AA37-11
Fields marked * are required to be filled.