W6E500-CJ03-81

Produttore: EBM-PAPST

Descrizione:
AC axial fan - HyBlade
Weight: 17.66 kg
Motor size: 110
Size: 500 mm
Rotor surface: Painted black
Terminal box material: PC/ABS plastic
Blade material: Press-fitted sheet steel blank, sprayed with PP plastic
Fan housing material: Sheet steel, galvanized and coated with cement-gray plastic (RAL 7033)
Guard grille material: Steel, coated with cement-gray plastic (RAL 7033)
Number of blades: 5
Airflow direction: A
Direction of rotation: Clockwise, viewed toward rotor
Degree of protection: IP54
Insulation class: "F"
Ambient temperature note: Occasional start-up at temperatures between -40°C and -25°C is permitted. For continuous operation at ambient temperatures below -25°C (such as refrigeration applications), use must be made of a fan design with special low-temperature bearings.
Moisture (F) / Environmental (H) protection class: H2+T
Max. permitted ambient temp. for motor (transport/storage): +80 °C
Min. permitted ambient temp. for motor (transport/storage): -40 °C
Installation position: Shaft horizontal or rotor on top; rotor on bottom on request
Condensation drainage holes: On stator side
Mode: S1
Motor bearing: Ball bearing
Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system): <= 3,5 mA
Electrical hookup: Terminal box
Motor protection: Thermal switch auto reset, lead out, with basic insulation
with cable: Axial
Protection class assignment: I; If a protective earth is connected by the customer|This component for installation may have several local protection classes. This information relates to this component’s basic design.|The final protection class is based on the component’s intended installation and connection.
Motor capacitor according to EN 60252-1 in safety protection class: S0
Conformity with standards: EN 60034-1 (2010)
Comment on CE: Operation only permitted outside the European Economic Area
Approval: CSA C22.2 No. 100 / EAC / UL 1004-1 / VDE