K3G400-RP45-20

Fabricant : EBM-PAPST

Description :
EC centrifugal module - RadiCal
Weight: 10.44 kg
Motor size: 84
Size: 400 mm
Rotor surface: Painted black
Electronics housing material: Die-cast aluminum
Impeller material: PP plastic UL
Support plate material: Sheet aluminum
Spacer material: Aluminum
Inlet nozzle material: Sheet aluminum
Number of blades: 6
Direction of rotation: Clockwise, viewed toward rotor
Degree of protection: IP20
Insulation class: "B"
Moisture (F) / Environmental (H) protection class: H0 - dry environment
Max. permitted ambient temp. for motor (transport/storage): +80 °C
Min. permitted ambient temp. for motor (transport/storage): -40 °C
Installation position: Shaft horizontal or rotor on top; rotor on bottom on request
Condensation drainage holes: None
Mode: S1
Motor bearing: Ball bearing
Technical features: - Operation and fault indication via LED - Integrated PID controller - Motor current limitation - PFC, active - RS485 MODBUS-RTU with DCI function - Soft start - Control interface with SELV potential safely disconnected from supply - Thermal overload protection for electronics/motor - Undervoltage / phase failure detection
EMC immunity to interference: According to EN 61000-6-2 (industrial environment)
EMC circuit feedback: According to EN 61000-3-2/3
EMC interference emission: According to EN 61000-6-4 (industrial environment)
Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system): <= 3,5 mA
Electrical hookup: Plug
Motor protection: Thermal switch auto reset, internally connected
with cable: Variable
Protection class assignment: I; If a protective earth is connected by the customer|This component for installation may have several local protection classes. This information relates to this component’s basic design.|The final protection class is based on the component’s intended installation and connection.
Conformity with standards: EN 61800-5-1 / CE
Approval: CSA C22.2 No. 113 / EAC / UL 507