W4D630-CR01-80

Fabricante: EBM-PAPST

Descripción:
AC axial fan - HyBlade
Weight: 26 kg
Motor size: 110
Size: 630 mm
Rotor surface: Cast in aluminum, painted black
Terminal box material: Die-cast aluminum, painted black
Blade material: Sheet aluminum insert (painted black), sprayed with PP plastic
Fan housing material: Sheet steel, galvanized and coated with white aluminum plastic (RAL 9006)
Guard grille material: Steel, coated with white-aluminum plastic (RAL 9006)
Number of blades: 5
Blade pitch: -10°
Airflow direction: A
Direction of rotation: Clockwise, viewed toward rotor
Degree of protection: IP54
Insulation class: "F"
Ambient temperature note: Occasional start-up at temperatures between -40°C and -25°C is permitted. For continuous operation at ambient temperatures below -25°C (such as refrigeration applications), use must be made of a fan design with special low-temperature bearings.
Moisture (F) / Environmental (H) protection class: H2+T
Max. permitted ambient temp. for motor (transport/storage): +80 °C
Min. permitted ambient temp. for motor (transport/storage): -40 °C
Installation position: Shaft horizontal or rotor on top; rotor on bottom on request
Condensation drainage holes: On stator side
Mode: S1
Motor bearing: Ball bearing
Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system): < 0,75 mA
Electrical hookup: Terminal box
Motor protection: Thermal switch auto reset, lead out, with basic insulation
Protection class: I (with customer connection of protective earth)
Conformity with standards: EN 60034-1 (2010) / CE
Approval: EAC / VDE