Seleccionar Idioma
-
Inglés
-
Alemán
-
Francés
-
Español
-
Italiano
-
Portugués

61582400
Fabricante: Maedler
(10 reseñas)
Descripción:
Material: High quality steel 42CrMo4.
For fixing a hub (e. g. drive wheel, rotor or similar) on a shaft.
For medium torques.
Quick mounting.
Quick dismounting.
No axial offset during mounting.
Roughness: max, RZ=16 μm. Outer-Ø tolerance of hub = H9.
Recommended tolerances for hub bore / shaft diameter: from dw Ø 30 = H6/j6; Ø 31-50 = H6/h6; Ø 51-65 = H6/g6. It is essential to degrease the contact surfaces of shaft and hub bore. Lubricate only the shrink disk and the screws with MoS2 and place it on the hub. Turn in the screws evenly by hand. Surface Roughness, Tolerances and Mounting Fasten the tensioning screws evenly, in sequence (not crossing over) until the fastening torque TA of the table is reached. To reach the value of TA, several fastening steps are required. The figures for T stated in the table were calculated for a lubricated shrink disk.
En PARTS HUB LLC, suministramos productos no solo de Maedler sino también de muchas otras marcas. Ofrecemos una amplia gama de productos para proporcionar las mejores soluciones para las necesidades de nuestros clientes. Para obtener más información detallada sobre el producto Maedler - 61582400, realice una solicitud de inmediato. Si desea solicitar un producto diferente, solicitar oferta o envíe un correo electrónico a info@usapartshub.com.
Producto | Descripción | Tiempo de entrega |
---|---|---|
Maedler 65388308 | Material: Steel S235, galvanic zinc-plated. Turnbuckle DIN 1480, with 2 … | 4-5 Semanas |
Maedler 65491000VB | Material type black oxided: Body: steel, black oxide finish. Ball: … | 4-5 Semanas |
Maedler 65491200VB | Material type black oxided: Body: steel, black oxide finish. Ball: … | 3-6 Semanas |
Maedler 62250520 | Material: GG25. Bores ISO E8. Keyways in accordance with DIN … | 3-4 Semanas |
Maedler 65358008 | Material: Body of the nut steel, min. strength 350 N/mm2. … | 3-6 Semanas |
Maedler 65358009 | Material: Body of the nut steel, min. strength 350 N/mm2. … | 4-5 Semanas |
Maedler 63052500 | Material: mineral-oil resistant material based on nitrile rubber, with a … | 3-6 Semanas |