K3G200-AD11-02

Fabricante: EBM-PAPST

Descripción:
EC diagonal module
Weight: 2 kg
Motor size: 55
Size: 200 mm
Rotor surface: Thick-film passivated
Terminal box material: PA plastic
Electronics housing material: Die-cast aluminum
Impeller material: PA plastic
Housing material: PP plastic
Number of blades: 7
Direction of rotation: Clockwise, viewed toward rotor
Degree of protection: IP54
Insulation class: "B"
Moisture (F) / Environmental (H) protection class: H1
Max. permitted ambient temp. for motor (transport/storage): + 80 °C
Min. permitted ambient temp. for motor (transport/storage): - 40 °C
Installation position: Any
Condensation drainage holes: None, open rotor
Mode: S1
Motor bearing: Ball bearing
Technical features: - Output 10 VDC, max. 1.1 mA - Tach output - Power limiter - Motor current limitation - Soft start - Control input 0-10 VDC / PWM - Control interface with SELV potential safely disconnected from the mains - Thermal overload protection for electronics/motor
EMC immunity to interference: According to EN 61000-6-2 (industrial environment)
EMC interference emission: According to EN 61000-6-4 (industrial environment)
Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system): <= 3,5 mA
Electrical hookup: Terminal strip
Motor protection: Electronic motor protection
with cable: Variable
Protection class: I (with customer connection of protective earth)
Conformity with standards: EN 60335-1 / CE
Comment on CE: Ecodesign Directive 2009/125/EC + Fan Directive (EC) No. 327/2011 does not apply, as power consumption <125W.
Approval: UL 1004-7 + 60730-1 / CSA C22.2 No. 77 + CAN/CSA-E60730-1