K3G160-AD01-01

Fabricante: EBM-PAPST

Descripción:
EC centrifugal fan combination
Weight: 6.2 kg
Motor size: 74
Size: 160 mm
Rotor surface: Galvanized
Electronics housing material: PP plastic
Impeller material: Sheet steel, galvanized
Housing material: PP plastic
Motor suspension: Motor vibration-damped on both sides
Direction of rotation: Clockwise, viewed toward rotor
Degree of protection: Motor IP44, electronics IP20 / installation- and position-dependent
Insulation class: "F"
Moisture (F) / Environmental (H) protection class: H0+
Max. permitted ambient temp. for motor (transport/storage): + 80 °C
Min. permitted ambient temp. for motor (transport/storage): - 40 °C
Installation position: Any
Condensation drainage holes: None, open rotor
Mode: S1
Motor bearing: Ball bearing
Technical features: - Output 10 VDC, max. 1.1 mA - Tach output - Motor current limitation - Soft start - Control input 0-10 VDC / PWM - Control interface with SELV potential safely disconnected from supply - Thermal overload protection for motor
EMC immunity to interference: According to EN 61000-6-2 (industrial environment)
EMC interference emission: According to EN 61000-6-3 (household environment), except EN 61000-3-2
Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system): <= 3,5 mA
Electrical hookup: Plug
Motor protection: Thermal switch auto reset, internally connected
with cable: Lateral
Protection class assignment: I; If a protective earth is connected by the customer|This component for installation may have several local protection classes. This information relates to this component’s basic design.|The final protection class is based on the component’s intended installation and connection.
Conformity with standards: EN 60335-1 / CE
Approval: UL 1004-7 + 60730-1 / CSA C22.2 No. 77 + CAN/CSA-E60730-1