G4D225-FK20-02

Fabricante: EBM-PAPST

Descripción:
AC centrifugal fan
Weight: 9.5 kg
Motor size: 94
Size: 225 mm
Rotor surface: Painted black
Impeller material: Sheet steel, galvanized
Housing material: Sheet steel, galvanized
Direction of rotation: Clockwise, viewed toward rotor
Degree of protection: IP54
Insulation class: "F"
Moisture (F) / Environmental (H) protection class: H1+
Max. permitted ambient temp. for motor (transport/storage): +80 °C
Min. permitted ambient temp. for motor (transport/storage): -40 °C
Installation position: Shaft horizontal or rotor on bottom; rotor on top on request
Condensation drainage holes: On rotor side
Mode: S1
Motor bearing: Ball bearing
Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system): <= 3,5 mA
Motor protection: Thermal switch auto reset, lead out, with basic insulation
with cable: Variable
Protection class assignment: I; If a protective earth is connected by the customer|This component for installation may have several local protection classes. This information relates to this component’s basic design.|The final protection class is based on the component’s intended installation and connection.
Conformity with standards: EN 50155: 2008; EN 61373, Cat. 1B: 2010; EN 45545-2, HL3: 2013 + A1:2015
Comment on CE: Ecodesign Directive 2009/125/EC + Fan Regulation (EC) No. 327/2011 does not apply, as use only in means of transport for transporting persons or goods.
Approval: EAC
Comment: Prerequisite for operation is a Class 1 vehicle electrical system architecture according to EN 50533