W6E630-KN01-01

Hersteller: EBM-PAPST

Beschreibung:
AC axial fan - AxiCool
Weight: 19 kg
Motor size: 110
Size: 630 mm
Rotor surface: Painted black
Terminal box material: PP plastic
Blade material: Press-fitted sheet steel blank, sprayed with PP plastic
Fan housing material: PP plastic
Material guide vanes: PP plastic
Guard grille material: Steel, coated with black plastic (RAL 9005)
Number of blades: 5
Airflow direction: V
Direction of rotation: Counterclockwise, viewed toward rotor
Degree of protection: IP54
Insulation class: "F"
Ambient temperature note: If there is a risk of ice formation, the fan is only to be operated with a heating tape in the fan housing. Further information can be obtained from ebm-papst. As fan for use with industrial evaporators, suitable for ambient temperatures between -40°C and +20°C, occasional start-up at up to +40°C permissible.
Moisture (F) / Environmental (H) protection class: H2
Max. permitted ambient temp. for motor (transport/storage): +70 °C
Min. permitted ambient temp. for motor (transport/storage): -40 °C
Installation position: See fitting instructions
Condensation drainage holes: On rotor side
Mode: S1
Motor bearing: Ball bearing with low-temperature lubricant
Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system): <= 3,5 mA
Motor protection: Thermal switch auto reset, lead out, with basic insulation
Protection class: I (with customer connection of protective earth)
Motor capacitor according to EN 60252-1 in safety protection class: S0
Conformity with standards: EN 61800-5-1; EN 60034-1 (2010) / CE
Approval: VDE / EAC