W3G630-NR63-01

Hersteller: EBM-PAPST

Beschreibung:
EC axial fan - AxiBlade
Weight: 24.3 kg
Motor size: 112
Size: 630 mm
Rotor surface: Painted black
Terminal box material: PP plastic
Electronics housing material: Die-cast aluminum, painted black
Impeller material: PP plastic
Fan housing material: Sheet steel, galvanized and coated with black plastic (RAL 9005)
Guard grille material: Steel, coated with black plastic (RAL 9005)
Number of blades: 5
Blade pitch: 0°
Airflow direction: V
Direction of rotation: Clockwise, viewed toward rotor
Degree of protection: IP55
Insulation class: "F"
Ambient temperature note: Occasional start-up at temperatures between -40°C and -25°C is permitted. For continuous operation at ambient temperatures below -25°C (such as refrigeration applications), use must be made of a fan design with special low-temperature bearings.
Moisture (F) / Environmental (H) protection class: H2
Max. permitted ambient temp. for motor (transport/storage): +80 °C
Min. permitted ambient temp. for motor (transport/storage): -40 °C
Installation position: Shaft horizontal or rotor on bottom; rotor on top on request
Condensation drainage holes: On rotor side
Mode: S1
Motor bearing: Ball bearing / (sealed)
Technical features: - Output 10 VDC, max. 10 mA - Operation and alarm display - External 24 V input (parameter setting) - Alarm relay - Integrated PID controller - Motor current limitation - PFC, passive - RS-485 MODBUS-RTU - Soft start - EEPROM write cycles: 100,000 maximum - Control input 0-10 VDC / PWM - Control interface with SELV potential safely disconnected from the mains - Thermal overload protection for electronics/motor - Line undervoltage / phase failure detection
EMC immunity to interference: According to EN 61000-6-2 (industrial environment)
EMC interference emission: According to EN 61000-6-3 (household environment), except EN 61000-3-2 for professionally used equipment with a total rated power greater than 1 kW
Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system): <= 3,5 mA
Electrical hookup: Terminal box
Motor protection: Thermal switch auto reset, internally connected
Protection class assignment: I; If a protective earth is connected by the customer|This component for installation may have several local protection classes. This information relates to this component’s basic design.|The final protection class is based on the component’s intended installation and connection.
Conformity with standards: EN 61800-5-1 / CE / UKCA
Approval: CSA C22.2 No. 77 + CAN/CSA-E60730-1 / EAC / UL 1004-7 + 60730-1